Let’s Get It On – Platen Press Tip

admin — Tue, 27 Jul 2010 17:23:55 +0000

Sometimes it’s possible to get an oversize sheet on an undersized platen letterpress. What is important to keep in mind is the distance between the arms on either side of the platen. As long as the sheet is smaller than that dimension, it could fit.

This is a long 4 x 18 inch card that needs to fold in half to 4 x 9 inch and fit into a standard #10 envelope. We are set up in this photo to run a 3 point matrix score, but this works for printing as well. To fit this sheet size onto our 10 x 15 size C&P platen press required a special McGill gauge pin for the side guide that fits between the tympan bail and the side of the platen. It extends beyond the platen and adds the couple inches needed to get the sheet to land inside the working area. It is a good solution to handle smaller hand fed jobs.

These guides came with equipment we purchased several years ago and we can not find more. Although, it could be rigged up from hardware store material pretty easily. If anyone has a source for these guides, please share! Someday we’ll just get a bigger hand fed press, but then there will be an even bigger sheet.

Forward Blotter Business Cards

admin — Tue, 02 Feb 2010 21:45:48 +0000

We made some new friends in London at a digital agency called Forward. They rebranded themselves recently and designed these cards that feel very undigital and textural, and that is what we do best. They are printed on Ahlstrom Blotter stock with custom duplexing to bring the thickness to about 50pt. This blotter board has an uneven pulp formation that gives the flood of ink a washed, almost denim feel on the soft paper stock. The cards are edge colored in a matching purple. And this was no small task, an office of over forty people is a lot of cards. We ran them 10 cards up on press five press forms.

Beast Pieces » sheet

Let’s Get It On – Platen Press Tip

Forward Blotter Business Cards