Sometimes it’s possible to get an oversize sheet on an undersized platen letterpress. What is important to keep in mind is the distance between the arms on either side of the platen. As long as the sheet is smaller than that dimension, it could fit.
This is a long 4 x 18 inch card that needs to fold in half to 4 x 9 inch and fit into a standard #10 envelope. We are set up in this photo to run a 3 point matrix score, but this works for printing as well. To fit this sheet size onto our 10 x 15 size C&P platen press required a special McGill gauge pin for the side guide that fits between the tympan bail and the side of the platen. It extends beyond the platen and adds the couple inches needed to get the sheet to land inside the working area. It is a good solution to handle smaller hand fed jobs.
These guides came with equipment we purchased several years ago and we can not find more. Although, it could be rigged up from hardware store material pretty easily. If anyone has a source for these guides, please share! Someday we’ll just get a bigger hand fed press, but then there will be an even bigger sheet.
A little design and print job we just wrapped up. Robot Deer. Enough said.
Rotate an eyeball towards that real small type on the front- 1.5 point type, whew.
The esteemed fellows at Wilderness in Portland sent us an unusually simple business card for letterpress printing. Rather than load up the card with four telephone numbers, an email, a fax, a twitter, etc – they all simply share the same card. A nice solution for keeping cost down too. Wilderness is the new design trailhead of Aaron James Draplin, John Phemister and David Nakamoto. We can’t wait to see what they do next. Of course, simple design doesn’t always mean simple production. We printed these on 220lb Pearl White Lettra, 100% cotton. Flooding a dark color like this on letterpress is difficult to lay down and keep consistent over the course of the print run – especially on a stock that has some texture to the
surface. When we print a solid like this, we generally go to our Paul Bunyan of Heidelberg Windmill presses – the 13 x 18. Even so, there is still a salty, weathered look to how a stock like this will take a solid coverage on letterpress. But we like it that way, it ain’t offset.