Studio On Fire // Design & Letterpress Blog
This wedding invitation for Andy and Drew is certainly a unique format. It was designed by Drew Hodgson for his wedding in Palm Springs, CA. The bold colors and contemporary shapes make the design both modern and masculine. The invite is actually a folder enclosure that opens to reveal the invitation text on the flap. The folder opens further to Continue reading ‘Modern Graphic Type Wedding’
Space 150 is a Minneapolis based company that has made some waves in the creative community by reinventing its identity every 150 days. This version was designed by Evan Nagan. We’ve produced many previous Space 150 business card versions as well – see some of them here and here.
Like the previous versions we’ve printed, these business cards take some tricky production. They are printed three color offset on one side (flood of black, purple and blue) and 2 color letterpress printed on the reverse (blue and tonal white). They have a unique two color gradient treatment on their edges. The paper is Wausau Royal complements 100lb Bright White which is custom duplexed after offset printing to a final thickness of 200lb cover. For a great edge color effect we recommend a thickness of 160lb or greater. The thicker the better.
It’s a big task! Each identity version is cards for nearly 70 people…
Tactile design can use a lot of different production processes. This card is both blind embossed and letterpress printed. Many people incorrectly use the term “emboss” when speaking about letterpress printing. “Emboss” actually refers to a raised area accomplished by use of a two part die with a form and a counter form. Letterpress printing with heavy impression is closer to a “deboss.” A deboss is pushing down into the paper. (remember “d” for down = deboss) Letterpress plates can use ink but embossing and debossing dies do not use ink. They must be used blind, registered to preprinted artwork or used with foil stamping / blocking.
Letterpress equipment can be used for embossing, debossing and letterpress printing, with the correct dies. Unlike embossing and debossing, letterpress plates do not use a form and counter form. A letterpress plate is inked and pressed down into the sheet. See an image below with the polymer plate and its corresponding print and note the difference from the copper embossing die with a white and blue fiberglass counter form that made the circular design embossed on this card. These are two very different types of plates and printing effects, but run on the same Heidelberg windmill press.
Considering each side of the page is an important design consideration with tactile production processes. With letterpress plates, the amount of bruising or “show through” on the back of the print depends on the amount of pressure applied during printing. However, this definition on the reverse side of the sheet is different on embossing dies because there is a counter form that pushes into the sheet.
When an emboss is specified there are a few other considerations we would mention. Smaller sized artwork, say 12 point type and smaller offers very little raised definition. Paper thickness is also a concern. We like really thick stocks for letterpress printing, but when embossing that thickness makes it even more difficult to get good definition in smaller details. This paper was 134lb Crane Cover Flo. White, it is 100% cotton and offers a soft and sculptured impression.
Abbie at Passing Notes is a master of refined print design. Her type is always exquisite and these cards for her client Aphro Chic were a pleasure to print. They are on a thick 60pt blotter stock with a flood of bold geometric pattern on the back and two color letterpress on the front. The blotter sheet has a pulpy appearance with lots of soft fiber texture. We printed the business cards along with a note card on the same press sheet so the print dollar went a bit further. The business cards were edge colored in a PMS match yellow for the perfect finishing accent.
