Beast Pieces » business card

Matching Paper To Sand

admin — Tue, 08 Mar 2011 20:00:35 +0000

Sometimes when you run an island in the Bahamas, you’ll need a business card that reflects the surrounding beauty. This textural business card was designed by island director Cathy Daly for Musha Cay, David Copperfield’s lush 700 acre tropical retreat.

These cards were letterpress printed in three colors on an appropriately sandy colored Mohawk Loop Antique Vellum Husk, custom pasted to a 220lb weight. Note how the island seal is printed in with just tonal transparent white ink. After the letterpress printing, these sheets were pasted back to back with digitally printed sheets (with the island beach image) for a 320lbC final weight. Those sheets were trimmed into oversize 4 x 2 inch business cards and edge colored in a matching blue.

Point Form Business Cards

admin — Thu, 03 Feb 2011 02:51:22 +0000

We recently printed these business cards, designed by the fellows at Point Form, a Canadian design collective.

A little tricky production was in order with their design. The paper we used is a 100lb French Poptone Sweet Tooth custom pasted (duplexed) after printing to 100lb French Poptone Lemon Drop for a final 200lb Cover stock. Pasting sheets after printing can add a little cost, but with a two sided card it is the best production move because we don’t need to worry about impression show through from a heavy letterpress imprint. Note that there is no indentation from one side to the other.

Space150 V26 Business Cards

admin — Fri, 24 Sep 2010 23:28:40 +0000

Just launched this last week was the 26th version of the Space150 identity. These guys change up their identity every 150 days. They designed this business card with lots of production love. Here are the production steps:

1. Custom pasted triple layer stock. Black with a white middle, 330lb total weight.

2. Black foil on the logo side

3. Letterpress printed metallic ink on the info side

4. Die cut with little “snake bite” marks

See previous Space150 card versions we’ve printed here and here and here.

Human Hand Varnish On Black Business Card

admin — Mon, 20 Sep 2010 13:46:53 +0000

Straight from Hawaii, Human Hand sent us this fine business card design for letterpress printing. And we love the name. After all, human hands touching the tactile printing is what this letterpress card is all about. It is a subtle tonal varnish on one side and PMS 877 metallic silver ink on the other. The paper stock is our custom 200lb Wausau Eclipse Black cover weight.

Beautiful Blind Impression Business Card

admin — Wed, 15 Sep 2010 12:18:23 +0000

This stunning letterpress business card was designed by 485 inc. for an arts group called Artistaday. And as the name would imply, Artistaday is a website that has a daily fine artist featured. Great stuff too, make sure and check them out here.

The typographic design is nice and bold, making the blind (inkless) impression really stand out. These business cards do something that does take an extra production step – heavy impression on both sides that lines up from side to side. To get this blind type to look really look good and provide enough sculptural to keep it readable without ink, it needed to be printed as a single sheet, then pasted back to back after printing so the impression on one side wouldn’t flatten the impression on other. The cards were printed on 110lbC Crane Lettra, then glued together for the final 220lb thickness.